Anchors

塑料壁虎

产品名称: Anchors

产品规格:

Plastic Anchors
1.These plastic anchors are intended for light duty anchoring applications and offer extra support.
2. The split in the ribbed anchors expand on two opposing sides as you tighten the screw.
Ribs prevent the anchor from turning in the hole during installation.
3. The split in the anchor ensures three way expansion on sides for increased holding power.
4. 1/4" Drill Size. Once anchor installed, they provide a flush, clean appearance in drywall.

Hammer Fixing & Plug
For fixing of concrete, solid bricks, perforated bricks, hollow blocks.
• The fixings are manufactured from the same high- grade and quality-monitored polyimide (nylon) which is also used for the frame fixings with general building inspectorate approval.
• The material is temperature resistant (-40° to +80°C.)
• Pre-assembled for quick and easy installation.
• High holding power.
• Cost-effective alternative for the quick and easy installation of sheets, cable and pipe clips, perforated tapes, subframe systems and wall connection or plaster profiles that do not require an approved fixing solution.

316 Stainless Steel Wedge Anchor Zinc Plated
• The anchor is made from 316 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material.
• The anchor requires a 3/8" hole to be drilled in the base material (Concrete only).
• The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
• The one-piece clip is formed around Anchor, assuring full expansion for dependable, superior holding power. Expanding clip will not fall off or twist in the hole.
• The test values listed below were obtained using 200-250 kgs/cm² concrete (no aggregate). A safe working load should not exceed 25% sated values.

Sleeve Anchor ZY
Pre-assembled for quick and easy installation,can be used in thin sections of concrete or solid masonry.
• Head styles for every application.
• The test values listed below were obtained using 200-250 kgs/cm² concrete (no aggregate). A safe working load should not exceed 25% sated values.
All-purpose expansion anchor for use in mediumweight applications. Quick and easy to install with no marking out required. Bolt and drill size marked on sleeve to ensure correct installation. Designed for optimal performance in concrete, brickwork, blockwork and stone. Ideal for stadium seating, satellite dishes, garage doors, shutters, signs and radiators.

1/2" (Inside/Screw 1/2" Diameter) Drop-in Anchor Zinc Plated
• Perfect expansion and specially designed built-in plug ensures full expansion of anchor.
• The anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material.
• Drop-In Anchors work by pre drilling the hole, dropping the anchor in and then using the setting tool to create the expansion for securing the bolt. This anchorage system then allows you to remove the bolt if needed and leaves the anchor in place and not visible if you choose not to replace the permanent fixing.

 关于和驿国际有限公司

公司名称:

和驿国际有限公司

主要产品:

不鏽钢螺丝、自攻螺丝、三角牙螺丝、机械螺丝、鑽尾螺丝、屋顶螺丝、乾牆螺丝、甲板螺丝、塑板螺丝、水泥螺丝、金属橡胶复合华司、塑胶壁虎、家具螺丝、内六角头螺丝、内六角螺丝、内六角螺栓、马车螺栓、六角法兰螺栓、电梯螺栓、肩部螺栓、T型螺栓、犁型螺栓、双头螺柱、六角螺栓、六角尼龙螺帽、六角法兰螺帽、六角焊接螺帽、T型螺帽、加工零件、冲压件

国家:

台湾

地址:

82062高雄市冈山区嘉峰路224号

电话号码:

886-7-628-3366

传真:

886-7-628-1776

联系人:

苏文雅小姐
其它供货商相关产品